We offer you Oil Cooled Three Phase Servo Voltage Stabilizers. These stabilizers are used in several industrial, offices and domestic applications. Our Three Phase Oil cooled servo Voltage stabilizers are designed for precise control of output voltage that significantly increases the life of appliances and machine contacted through it. It also reduces breakdown and the cost maintenance.
Quantity
TECHNICAL SPECIFICATION
STANDERD
Confirming to latest IS:9815 and ISO 9001-2008 standerd.
RATING
01 KVA -300 KVA Single phase.
03 KVA -3000 Kva Three Phase.
INPUT VOLTAGE
Single phase (90V-270V , 140V-280V , 160V-260V )
Three phase (150V-460V , 250V-460V , 270V-460V )
OUTPUT VOLTAGE
Single phase (220V/230V/240V +/- 1% ).
Three phase ( 380V/400V/415V +/- 2% ).
WAVE FORM DISTORTION
nill
RESPONSE TIME
10m.sec
CORRECTION METHOD
Stepless Correction using Varic
CONTROL CIRCUIT
Fully Automatic IC Based Solid State,Glass
Epoxy Control Card for easy on line Serviceability
INPUT FREQUENCY
45-55Hz
COOLING
Natural Air /oil
EFFICIENCY
Better Than 98%
DUTY CYCLE
100%
OPERATION
Auto/Manual
NO LOAD LOSS
Less than 1%
SUITABILITY
Suiutable for 3 Phase Unbalanced/Balanced
Supply,Unbalanced/Balaced Loads
OPERATING TEMPERATURE
-15 C TO 50 C
ADDITIONAL FACILITY
Step downm/Isolations
COMPATIBILITY TO
Specially Designed Control Card for faithful
DG SET
operation on mains as well as DG set.
CONTROL PANEL
Power on Indicator,Low /High input Indicator,
Auto/Manual Selector Switch, PushSwitches to
Adjust output Voltage inManual Mode, Selector
Switch to monitor input/ output voltage
With in 5%of the set output voltage,Volt meter to
Indicator output/ Input voltage.
TRASFORMERS & VARIAC
Are wound with electrolyte Ghrade Copper of
99.9% purity . low loss CRGO laminatiopn is used to
Increased over all efficiency. This reduces energy
Losses and hences saves electricity
EARTHING
Provided through two bolts 7 nuts
HIGH VOLTAGE
With stands 2.5KV for power transformer
INSULATOR
Better than 5m ohms because of wound
RESISTANCE
components being bvaked in the oven at 110 C after Vacuum impregnation
